I'm really inspired by your fantastic ROV!
Do you have any photos over the interior?
Re: ROVER3D
Posted: Nov 21st, 2014, 12:55 pm
by ROVER3D
Do you have any photos over the interior?
Yes, but I can not currently show as prototype-modules for the X³-Control would be visible.
I emphasize that my ROV is 100% handmade. No lathe, CNC milling or CAD planning. Anyone can build it at home.
I hope to be able to show there are no limits to the imagination in the construction of submersible robots.
Re: ROVER3D
Posted: Feb 1st, 2015, 5:34 pm
by ROVER3D
I tried once in video editing to cut the encounter with a friend and his rov in November 2014.
Actually we wanted to go to a nightdive together but as i reached the lakebed the right thruster of his ROVs failed.
We have tried to analyze the error on the spot, but could not see whats wrong.
So i took a look around there and came back to him. Perfekt visibility only meters away...
We had to abort the dive... (last chance)
I have uploaded the video uncut original sound of ROVER3D. You can hear what engines running in oil
It also shows that I get to control the ROVER3D yet -.-
Video made with Lightworks : http://www.lwks.com - free professional software
Camera: GoPro Hero HD 1 und 2
I would appreciate comments.
Re: ROVER3D
Posted: Feb 2nd, 2015, 5:05 am
by Bubbles
Nice video but after five minutes I start feeling dizzy because of bad visibility.
How much thruster power you use in this dive ?
Re: ROVER3D
Posted: Feb 2nd, 2015, 12:35 pm
by ROVER3D
How much thruster power you use in this dive ?
What do you mean? Forward was 10%, sideways 50%, up/down 30% maximum power
It seems like going to the uncertain, but the sensor-data are not displayed in the video.
This is why navigation-sensors are very important and also a good light-solution.
We will be there again, maybe in march or april this year. Next try .
http://www.rov-control.com
(last chance)