![Camera Tube 40.jpg](./download/file.php?id=2863&sid=b2b7d730c534f1c28a38e4ea6a2f2ff1)
- Camera Tube 40.jpg (648.35 KiB) Viewed 52461 times
I almost forgot to drill and tap the camera pod mounting screw location so I took care of that before wiring up the camera.
![Camera Tube 41.jpg](./download/file.php?id=2864&sid=b2b7d730c534f1c28a38e4ea6a2f2ff1)
- Camera Tube 41.jpg (615.53 KiB) Viewed 52461 times
Next I had to machine up some tiny retainer nuts for the through connectors.
![Camera Tube 42.jpg](./download/file.php?id=2865&sid=b2b7d730c534f1c28a38e4ea6a2f2ff1)
- Camera Tube 42.jpg (403.64 KiB) Viewed 52461 times
I'm just making my own ring terminals by looping the wire around a larger 6-32" screw....
![Camera Tube 43.jpg](./download/file.php?id=2866&sid=b2b7d730c534f1c28a38e4ea6a2f2ff1)
- Camera Tube 43.jpg (460.7 KiB) Viewed 52461 times
... and then hitting it with some solder to reinforce them.
![Camera Tube 44.jpg](./download/file.php?id=2867&sid=b2b7d730c534f1c28a38e4ea6a2f2ff1)
- Camera Tube 44.jpg (747.7 KiB) Viewed 52461 times
The idea is to simply slip them on the 4-40" through connectors...
![Camera Tube 45.jpg](./download/file.php?id=2868&sid=b2b7d730c534f1c28a38e4ea6a2f2ff1)
- Camera Tube 45.jpg (705.61 KiB) Viewed 52461 times
... and secure them with the nuts I machined.
![Camera Tube 46.jpg](./download/file.php?id=2869&sid=b2b7d730c534f1c28a38e4ea6a2f2ff1)
- Camera Tube 46.jpg (693.38 KiB) Viewed 52461 times
This was a little more tedious then I imaged but I did get them all connected.
![Camera Tube 47.jpg](./download/file.php?id=2870&sid=b2b7d730c534f1c28a38e4ea6a2f2ff1)
- Camera Tube 47.jpg (865.04 KiB) Viewed 52461 times
Now I just have to splice these wires into the camera cable in the tether, test the camera again, and figure out whats next.