Search found 160 matches
- Oct 13th, 2022, 9:25 pm
- Forum: Introductions
- Topic: Saying hello
- Replies: 2
- Views: 5398
Re: Saying hello
Welcome. Looking forward to seeing your project.
- Jul 17th, 2022, 4:56 pm
- Forum: Board Messages
- Topic: The borad has been fixed..... I think.
- Replies: 3
- Views: 12632
Re: The borad has been fixed..... I think.
Thank you!! I thought this was gone forever.
- Dec 10th, 2021, 9:40 pm
- Forum: Control Systems and Tethers
- Topic: help plz, no power to motors
- Replies: 6
- Views: 8233
Re: help plz, no power to motors
I think you're reading the relay right.
Here's a link for the Seafox wiring. The COM, NC and NO are different on these relays, but you should be able adapt it to your relay.
http://www.homebuiltrovs.com/howtorelaywiringdpdt.html
Here's a link for the Seafox wiring. The COM, NC and NO are different on these relays, but you should be able adapt it to your relay.
http://www.homebuiltrovs.com/howtorelaywiringdpdt.html
- Nov 19th, 2021, 8:38 pm
- Forum: Frames, Hulls, & Bouyancy
- Topic: asking how to create the cover for the rov
- Replies: 3
- Views: 7383
Re: asking how to create the cover for the rov
I don't know, i've never done it myself. I suggest finding a 3D Printing forum and ask them if they have any answers for your question. Good luck.
- Nov 18th, 2021, 8:55 pm
- Forum: Frames, Hulls, & Bouyancy
- Topic: asking how to create the cover for the rov
- Replies: 3
- Views: 7383
- Oct 7th, 2021, 9:14 pm
- Forum: Your ROV Projects
- Topic: X wing ROV
- Replies: 19
- Views: 31884
Re: X wing ROV
Cool. Looking forward to seeing some pics/videos of your first dive.
- Jul 23rd, 2021, 8:34 pm
- Forum: Frames, Hulls, & Bouyancy
- Topic: Variable ballast tank with pumps instead of compressed air
- Replies: 4
- Views: 8767
Re: Variable ballast tank with pumps instead of compressed a
Can you draw a picture of what you're trying to do. And maybe take a few pictures of what you've done so far. I've been thinking about a variable ballast system also.
- Jan 6th, 2021, 9:03 pm
- Forum: Introductions
- Topic: Greetings from Ontrio
- Replies: 3
- Views: 7025
Re: Greetings from Ontrio
Greetings from the west coast. I get the eye rolls too, and the support.
- Dec 12th, 2020, 1:19 pm
- Forum: Control Systems and Tethers
- Topic: The Basic Rov Control System Wiring Manual (Rev. 1)
- Replies: 16
- Views: 37754
Re: The Basic Rov Control System Wiring Manual (Rev. 1)
If you go with the Velleman K8023 kit, you won't need power at your controller. The power input is on the receiver board, on the ROV. 12V. It sends the power up the tether to the control board, and the signal back down to the ROV. 10 channels over 2 wires. I use 2 kits. 8 channels for the thruster r...
- Nov 27th, 2020, 8:48 pm
- Forum: Control Systems and Tethers
- Topic: Relays
- Replies: 3
- Views: 8289