Page 1 of 1
vellman K8023 10 Channel 2 Wire Remote Control Kit
Posted: May 10th, 2012, 10:36 pm
by aquajack
How to use vellman K8023 10 Channel 2 Wire Remote Control Kit on a mate scout class rov? Would it involve programing and what whould I use for the surface controll? I would want to control 3 motors, manipulator and lights :geek:
Re: vellman K8023 10 Channel 2 Wire Remote Control Kit
Posted: May 11th, 2012, 8:09 am
by Kjetil
K8023 do not require any programming.
On surface you can use normal switch. And relay on the ROV.
Re: vellman K8023 10 Channel 2 Wire Remote Control Kit
Posted: May 11th, 2012, 12:37 pm
by aquajack
How would you wire it to the relays :geek:
Re: vellman K8023 10 Channel 2 Wire Remote Control Kit
Posted: May 11th, 2012, 5:44 pm
by Kjetil
Output is ground. Connect positive on one side of the relay and the other to the output of k8023.
Usermanual:
http://www.velleman.eu/downloads/0/illu ... _k8023.pdf