Getting back into it
Posted: Nov 8th, 2011, 10:01 pm
well, since its getting cold and I have time to work on crazy projects, i will be digging out the old ROV plans. my original design was 1.5" PVC and was 4' by 2' on top, 18" tall, and the lower part was 3' by 2', like a parallelogram with the top slanting twoards the bottom, except with the back side being completely vertical. I want to use the same design, as it is so versatile, but rebuild it in 1" PVC, so it is lighter, cheaper, and the thrusters won't need to be so big or work as hard to move something with that much drag. so, I'm back and hopefully I will be following through and building my ROV this time!