Page 1 of 1
ROV building article from IEEE
Posted: Sep 23rd, 2011, 1:51 pm
by derelicte
IEEE Spectrum has an article about building your own rov:
http://spectrum.ieee.org/geek-life/hand ... ign=090111
Re: ROV building article from IEEE
Posted: Oct 6th, 2011, 3:23 pm
by sthone
Pretty cool ..... I'm guessing that is the same David Schneider that built this ROV listed on the PCBexpress site.
http://www.expresspcb.com/Feedback/ROV/ROV.htm Looks like the same general Design anyway. If I remember correctly that one is from like 10 years ago too.
-Steve
