Homebuilt ROVs Forum

Hi all,

I am shopping for a small quantity of slow curing (like several hours) low viscosity epoxy that will hold up in salt water when cured. Any ideas?

Randy

@
rehoward,

Try using Loctite Marine grade Epoxy: https://www.bluerobotics.com/store/tool ... ine-epoxy/

It can be applied with a syringe using either 15 or 18 gauge tips.

It sets up in about 3 hours and is fully cured in 24 hours.

You can buy it at Home Depot for around $5.50 USD.

Regards,
SSN626B/TCIII