Stinger Controller

.

There's no high tech electronics employed in my Rov, it just uses plain switches for control. All the parts were obtained from Radio Shack.
This is how the switches are set up in the stinger. This setup allows for simple forward reverse for the thruters.

.
The Tether is made from two 20 foot lengths of 3/8" vinyl hose. The sections are connected together with 3/8" hose barb and hose clamps which turns out to be a bad idea. The hoses are not flex able enough and I will have to change them to a better design in the future.

All Information, Pictures, and Material is copyright © 1998-2009 by Stephen Thone and may not be used for any personal or commercial purposes without the consent of the author. All rights reserved. The Author makes no guarantees or warranties as to the accuracy or completeness of, or results to be obtained from accessing and using the Information herein.