Hello to the few but dedicated
Posted: Nov 23rd, 2010, 6:16 pm
Hi- I am Richard Dodds and have been working on ROVs for about a year now. Yes, leaks are a problem 
. I am a diver and also work in the technology field. My goal was to get a basic working ROV (succeeded this summer) then work on a more sophisticated version this winter. I am looking at using a Ethernet controlled relay board from National Control Devices - http://www.controlanything.com Once I get over the leak issue I will use my first ROV as a test bed for the new controls. Anyway – thank you Steve for your support and putting this site together.
. I am a diver and also work in the technology field. My goal was to get a basic working ROV (succeeded this summer) then work on a more sophisticated version this winter. I am looking at using a Ethernet controlled relay board from National Control Devices - http://www.controlanything.com Once I get over the leak issue I will use my first ROV as a test bed for the new controls. Anyway – thank you Steve for your support and putting this site together.