My Meager Machine II
My Meager Machine II
Here are pics of my first 4 frames and designs I'm going to be testing number 4 today with everything installed and ready to go. We'll see how it goes.
- Attachments
-
- First attempt Modeled after the hornet.
http://my.fit.edu/~swood/ROV_2.html - Rov001.jpg (59.99 KiB) Viewed 3327 times
- First attempt Modeled after the hornet.
-
- Scaled down, balance and weight all wrong flipped up side down.
- Rov002.jpg (108.34 KiB) Viewed 3327 times
-
- Dive motor in the back tipped the unit up and down. And the cup is pretty flimsy not a deep diver.
- Rov003.jpg (90.42 KiB) Viewed 3327 times
-
- Latest and greatest attempt initial water test went well so I preceded to finish it out. I will post some video as I get it tweaked into shape New Camera and control housings, Adjusted frame style, New dive motor mount set in the center of the unit, New light housings and design.
Added 2 Battery packs for camera and lights to avoid voltage drop problems with both. - Rov004.jpg (169 KiB) Viewed 3327 times
- Latest and greatest attempt initial water test went well so I preceded to finish it out. I will post some video as I get it tweaked into shape New Camera and control housings, Adjusted frame style, New dive motor mount set in the center of the unit, New light housings and design.
Re: My Meager Machine II
It's looking pretty good... are you using blower motors for thrusters? if so how well do they work?
-Steve
-Steve
Re: My Meager Machine II
The motors are just ducted fans for RC planes brushed dc motors that can run around 10v.
I got them from Tower Hobbies http://www3.towerhobbies.com/cgi-bin/wt ... LXSBF7&P=7.
With voltage drop down 100' of tether it works out about right.
I got them from Tower Hobbies http://www3.towerhobbies.com/cgi-bin/wt ... LXSBF7&P=7.
With voltage drop down 100' of tether it works out about right.