Thruster placement
Posted: Jan 18th, 2019, 5:13 pm
I started a ROV project several years ago and have made so many mistakes, I decided to start over. For my thrusters, I am going to 3D print ones like at https://www.bluerobotics.com/product-ca ... /bluerov2/. My first question is about thruster placement. I would like to go pretty fast wherever, but at the same time be able to maneuver somewhat. The placement like on the https://www.bluerobotics.com/product-ca ... /bluerov2/ seems to be able to do that. I know there are different ways of doing it, but I would like the best for what I am doing. I see that they have six thrusters, two are horizontal and four are vertical. What do the two extra vertical do?
My next question is what ECS’s are everyone using? I have seen some car ones, but they have a fan on them. What would that fan do in a sealed tube? I want to not make so many mistakes this time. Thanks
My next question is what ECS’s are everyone using? I have seen some car ones, but they have a fan on them. What would that fan do in a sealed tube? I want to not make so many mistakes this time. Thanks