Prop adapters
Posted: Mar 25th, 2016, 4:15 pm
Hello, I have used these on my Rule bilge pumps and they work really well. I don`t have the equipment or time to make my own, all I needed to do to make them fit the 3.17mm shaft on the pump was use a 1/8" ream to open it up.
Cheap as chips and work well.
http://www.banggood.com/2mm2_3mm3mm3_17 ... 43629.html
Cheap as chips and work well.
http://www.banggood.com/2mm2_3mm3mm3_17 ... 43629.html