hello,i'd like to make H-bridge for my motors to control them in both direction and its speed.
my motors need 24 V and 5 A to work perfectly ,any help?
H-bridge
-
- Posts: 289
- Joined: Sep 10th, 2013, 5:26 pm
- Location: New Jersey Shore
Re: H-bridge
I haven't built one, but I've read write-ups on Instructables that might help. Here's one:
http://www.instructables.com/id/H-Bridg ... readboard/
I also found this write-up at let's make robots:
http://letsmakerobots.com/node/2484
http://www.instructables.com/id/H-Bridg ... readboard/
I also found this write-up at let's make robots:
http://letsmakerobots.com/node/2484
Re: H-bridge
If you want to control speed you'll need something that generates PWM signals.
http://www.nathandumont.com/node/249
Which normally involves a microcontroller.
http://ww1.microchip.com/downloads/en/A ... 00893a.pdf
I'm a fan of Microchip, but lots of other different microcontrollers, such as the Arduino, which seems to be quite popular on this website and many others will do a similar job.
I hope this helps.
Martin
http://www.nathandumont.com/node/249
Which normally involves a microcontroller.
http://ww1.microchip.com/downloads/en/A ... 00893a.pdf
I'm a fan of Microchip, but lots of other different microcontrollers, such as the Arduino, which seems to be quite popular on this website and many others will do a similar job.
I hope this helps.
Martin