ROV-Control V3
Re: ROV-Control V3
overview of X³-Control modules
Re: ROV-Control V3
Can I ask how you would hope to implement a gps receiver using this board? An antenna at topside?
Re: ROV-Control V3
For GPS you need a GPS-Receiver with seriell interface and NMEA-Protokoll. The X³-Control does not have an own receiver onboard.
GPS is only available on surface. So you can relocate findings after the position determination.
GPS is only available on surface. So you can relocate findings after the position determination.
Re: ROV-Control V3
Is this all PC driven? No joystick control. Will it work with MAC?
Chuck
Chuck
Re: ROV-Control V3
Sorry, at the moment the software only works with windows XP or higher (recommend Windows 7)
For control you need a usb-joystick or gamecontroller (recommend 3-axis joystick e.g. Saitek X52 pro)
The software is designed for HOTAS (http://en.wikipedia.org/wiki/HOTAS).
For configuration the thrustersetup supports 6 axis to eight motor-channels. You can enable each channel to an axis and setup direction and power of each channel. There will be many updates next time with new functions, sensor-interfaces, modules and of course you can add your suggestions for features to the ROV-Control Forum visit http://www.rov-control.com/forum/en/
For control you need a usb-joystick or gamecontroller (recommend 3-axis joystick e.g. Saitek X52 pro)
The software is designed for HOTAS (http://en.wikipedia.org/wiki/HOTAS).
For configuration the thrustersetup supports 6 axis to eight motor-channels. You can enable each channel to an axis and setup direction and power of each channel. There will be many updates next time with new functions, sensor-interfaces, modules and of course you can add your suggestions for features to the ROV-Control Forum visit http://www.rov-control.com/forum/en/
Re: ROV-Control V3
Wondering what the tether would be, and how is it connected to both the pc and control board ? It looks like a usb cable in the video.
This set up is what I have been looking for. Keep up the excellent work.
-Bob
This set up is what I have been looking for. Keep up the excellent work.
-Bob
Re: ROV-Control V3
For tether use CAT-cable. You will need 4 lines for data-connection so you have two pairs left for two videosignals. If you use passive video balun its up to 600m (1800ft) with color and with active balun up to 1500m (4500ft) tether...
Re: ROV-Control V3
Feel free to test ROV-Control V3 (beta)Demo for Windows XP/7/8
Please check System Requirements before installation!
http://www.rov-control.com/wiki/en/inde ... stallation
We are working on documentation and wiki...
Please check System Requirements before installation!
http://www.rov-control.com/wiki/en/inde ... stallation
We are working on documentation and wiki...
Last edited by ROVER3D on Jan 15th, 2014, 4:55 pm, edited 1 time in total.
- Oldsirhippy
- Posts: 86
- Joined: Oct 1st, 2013, 7:18 am
Re: ROV-Control V3
That is a very nice piece of setup software - I look forward to using it with one of your boards!
It worked fine in windows 8 up to my pressing exit.
It worked fine in windows 8 up to my pressing exit.