is how to do without the project, and maybe it's better to always something cool comes out
probably seen the photos above (case lighting and camera) everything would be fine if not for the fact that each one comes with the cable or 3, you have to get them to the place where the Aku 12v and electronics. And sealing the next 3 holes weaken the structure so I decided to use modular solution for you so
-at the general meeting (or an important meeting) remembered how well he dived in gold was supposed to be there and it was great ...... It was nice to look at first before someone decides to climb there.
Well, again, this time I bought Castorama:
Uploaded with ImageShack.us
Uploaded with ImageShack.us
so we created a module (cam + lighting) will be able to disassemble and reassemble it on a pole or line and see the place where the ROV approached not
short description:
steam line 4 or 8 cores
-2 Veins 12v lighting
-2 Veins VIDEO
-2 Core video power 9-12v 0.25 and
Today I could not all the solder so tomorrow maybe something more
continued
I have a little bit of time, but every moment I spend on ROVka
Webcam + transmitter (a little something to be able to transmit video up to 400m
Uploaded with ImageShack.us
by Bartek
Re: by Bartek
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Re: by Bartek
The project is looking good so far!
What is that monitor you're using? Is it from a car reversing camera set?
What is that monitor you're using? Is it from a car reversing camera set?
Re: by Bartek
There is a security camera monitoring and display an additional monitor from the car dvdAHarris wrote:The project is looking good so far!
What is that monitor you're using? Is it from a car reversing camera set?