Best way to mount an acrylic dome or clear PC sheet to hull?
Best way to mount an acrylic dome or clear PC sheet to hull?
I'm kinda new to the scene here. And I was just wondering, what's the best method to mount an acrylic dome or clear polycarbonate sheet cut out to my hull?
- bikerbones1968
- Posts: 374
- Joined: May 10th, 2012, 5:21 pm
- Location: Annapolis Valley Nova Scotia
- Contact:
Re: Best way to mount an acrylic dome or clear PC sheet to h
This is what worked for me. I drilled holes in the flange of my dome. I then drilled and tapped the face of the ROV flange. Applied 3M 5200 marine adhesive to the entire surface and using stainless steel bolts secured the dome to the hull.
See my build page
viewtopic.php?f=18&t=815&start=30
See my build page
viewtopic.php?f=18&t=815&start=30