vellman K8023 10 Channel 2 Wire Remote Control Kit

[aquajack]

How to use vellman K8023 10 Channel 2 Wire Remote Control Kit on a mate scout class rov? Would it involve programing and what whould I use for the surface controll? I would want to control 3 motors, manipulator and lights :geek:

[Kjetil]

K8023 do not require any programming.

On surface you can use normal switch. And relay on the ROV.

[aquajack]

How would you wire it to the relays :geek:

[Kjetil]

Output is ground. Connect positive on one side of the relay and the other to the output of k8023.

Usermanual:
http://www.velleman.eu/downloads/0/illu ... _k8023.pdf