Hello HomeBuiltROVs,
I was wondering if anyone had any experience with working with GoPro camera cases that would
a. Waterproof the camera ends
b. Allow a way to mount the camera someway to the frame
Thank you!
GoPro: Waterproofing Solution
- TigerShark
- Posts: 108
- Joined: Jan 7th, 2014, 2:43 pm
- Location: Washington State
Re: GoPro: Waterproofing Solution
Are you looking to go deeper than the included case the camera comes with or feed live video from the camera and need a way to seal the cable?
- KR2_Diving
- Posts: 391
- Joined: Aug 30th, 2012, 11:43 am
- Location: Currently: NW Suburbs of Chicago. Originally: NE Wisconsin
Re: GoPro: Waterproofing Solution
If you are looking to modify the existing case... i have seen a few examples of where they take the backpack door, and mounted a grommet in that. This allowed the 30pin connector to be connected, and extended outside the case to the control system.
Here is an example:
https://csumb.edu/eel/camera-system
Not my work personally... but I am a BIG fan of the idea!
Here is an example:
https://csumb.edu/eel/camera-system
Not my work personally... but I am a BIG fan of the idea!