Sharing some basic Solidworks files.

Place to discuss CAD and to share Files (zipped)
Post Reply
User avatar
sthone
Posts: 588
Joined: Nov 8th, 2010, 9:25 pm
Location: Connecticut
Contact:

Sharing some basic Solidworks files.

Post by sthone »

These are just some Solidworks files of standard Bilge Pump Thrusters Parts, PVC pipe, and some Fittings that I am sharing. Pretty basic stuff if you know CAD but these might help someone save some time in designing their Rov in the future so I figured what the hell. Files are zipped but are all in .SLDPRT format. There are a lot of PVC manufactures out there but these are about 99% correct as far as most of the outside dimensions go for the parts I had on hand.
User avatar
sthone
Posts: 588
Joined: Nov 8th, 2010, 9:25 pm
Location: Connecticut
Contact:

Re: Sharing some basic Solidworks files.

Post by sthone »

Thruster Parts
(Pump Tabs have been trimmed)
(Prop is just for looks. 50mm Dimension is correct but blade shape is not correct)
Assem Thruster with Mount.jpg
Assem Thruster with Mount.jpg (55.81 KiB) Viewed 15640 times
Assembled Parts
Attachments
Mayfair 750 GPH Pump.jpg
Mayfair 750 GPH Pump.jpg (57.15 KiB) Viewed 15640 times
Mayfair Pump 750.zip
(317.79 KiB) Downloaded 935 times
Pipe Clamp One and Half Inch.jpg
Pipe Clamp One and Half Inch.jpg (52.93 KiB) Viewed 15640 times
Pipe Clamp One and Half Inch.zip
(460.11 KiB) Downloaded 892 times
PVC One and Half Inch Pipe Motor Mount.jpg
PVC One and Half Inch Pipe Motor Mount.jpg (38.65 KiB) Viewed 15640 times
PVC One and Half Inch Pipe Motor Mount.zip
(55.72 KiB) Downloaded 907 times
Prop Adapter.jpg
Prop Adapter.jpg (49.74 KiB) Viewed 15640 times
Prop Adaptor.zip
(529.72 KiB) Downloaded 934 times
Nut 4mm.jpg
Nut 4mm.jpg (41.48 KiB) Viewed 15640 times
Nut 4mm.zip
(192.33 KiB) Downloaded 894 times
Prop 50mm.jpg
Prop 50mm.jpg (41.77 KiB) Viewed 15640 times
Prop 50mm.zip
(282.85 KiB) Downloaded 1004 times
User avatar
sthone
Posts: 588
Joined: Nov 8th, 2010, 9:25 pm
Location: Connecticut
Contact:

Re: Sharing some basic Solidworks files.

Post by sthone »

1/2" PVC Pipe & Fittings
(The look of the 1/2" 90 degree fitting is off a little but still useable.)
Attachments
PVC Half Inch Pipe.jpg
PVC Half Inch Pipe.jpg (36.99 KiB) Viewed 15640 times
PVC Half Inch Pipe.zip
(50.65 KiB) Downloaded 882 times
PVC Half Inch T.jpg
PVC Half Inch T.jpg (39.67 KiB) Viewed 15640 times
PVC Half Inch T.zip
(164.17 KiB) Downloaded 919 times
PVC One and Half Inch End Cap Round.jpg
PVC One and Half Inch End Cap Round.jpg (35.12 KiB) Viewed 15640 times
PVC Half Inch End Cap Round.zip
(116.2 KiB) Downloaded 913 times
PVC One and Half Inch End Cap Flat.jpg
PVC One and Half Inch End Cap Flat.jpg (34.12 KiB) Viewed 15640 times
PVC Half Inch End Cap Flat.zip
(84.28 KiB) Downloaded 848 times
PVC Half Inch Coupler.jpg
PVC Half Inch Coupler.jpg (42.08 KiB) Viewed 15640 times
PVC Half Inch Coupler.zip
(100.46 KiB) Downloaded 874 times
PVC Half Inch 90.jpg
PVC Half Inch 90.jpg (39.99 KiB) Viewed 15640 times
PVC Half Inch 90.zip
(159.76 KiB) Downloaded 893 times
User avatar
sthone
Posts: 588
Joined: Nov 8th, 2010, 9:25 pm
Location: Connecticut
Contact:

Re: Sharing some basic Solidworks files.

Post by sthone »

More various Pipe and Fittings
Attachments
PVC Two Inch End Cap Round.jpg
PVC Two Inch End Cap Round.jpg (38.97 KiB) Viewed 15640 times
PVC Two Inch End Cap Round.zip
(141.07 KiB) Downloaded 924 times
PVC Two Inch Pipe.jpg
PVC Two Inch Pipe.jpg (38.99 KiB) Viewed 15640 times
PVC Two Inch Pipe.zip
(61.25 KiB) Downloaded 887 times
PVC Three Quarter Inch Pipe.jpg
PVC Three Quarter Inch Pipe.jpg (37.76 KiB) Viewed 15640 times
PVC Three Quarter Inch Pipe.zip
(50.72 KiB) Downloaded 884 times
PVC One and Half Inch Pipe.jpg
PVC One and Half Inch Pipe.jpg (41.22 KiB) Viewed 15640 times
PVC One and Half Inch Pipe.zip
(58.84 KiB) Downloaded 863 times
PVC One Inch T.jpg
PVC One Inch T.jpg (42.61 KiB) Viewed 15640 times
PVC One Inch T.zip
(155.19 KiB) Downloaded 883 times
PVC One Inch Pipe.jpg
PVC One Inch Pipe.jpg (39.11 KiB) Viewed 15640 times
PVC One Inch Pipe.zip
(57.02 KiB) Downloaded 929 times
nirali31
Posts: 3
Joined: Feb 7th, 2019, 11:33 pm
Contact:

Re: Sharing some basic Solidworks files.

Post by nirali31 »

Got your basic Solidworks files . It was much needed.
lasikakawade
Posts: 1
Joined: May 17th, 2019, 3:00 am
Contact:

Re: Sharing some basic Solidworks files.

Post by lasikakawade »

Thanks for this great post :) well done
User avatar
Ramjet
Posts: 8
Joined: Sep 25th, 2021, 9:10 pm

Re: Sharing some basic Solidworks files.

Post by Ramjet »

I've added some DXF files of the bilge pump in case that can help with your designs.

Cheers,

Ramjet.
Attachments
Bilge Pump.zip
(41.37 KiB) Downloaded 472 times
Bilge Pump 2.JPG
Bilge Pump 2.JPG (122.39 KiB) Viewed 9467 times
Post Reply