Prop adapters

Anything to do with Propulsion.
Post Reply
bigdavevw
Posts: 22
Joined: May 7th, 2012, 12:40 pm

Prop adapters

Post by bigdavevw »

Hello, I have used these on my Rule bilge pumps and they work really well. I don`t have the equipment or time to make my own, all I needed to do to make them fit the 3.17mm shaft on the pump was use a 1/8" ream to open it up.

Cheap as chips and work well. 8-)

http://www.banggood.com/2mm2_3mm3mm3_17 ... 43629.html

Image
Post Reply