Page 1 of 1

3d printable parts to turn a tecnec jackreel 4 into a tether

Posted: May 3rd, 2017, 4:07 pm
by piercet
If anyone is interested, I published the parts for my Tether spool build today. It uses a tecnec Jackreel 4, a slipring, some bluerobotics fathom x tether boards and tether cable, an RCA Balun, and a couple of other bits. Should fit a 50M bluerobotics tether, or longer with smaller diameter cable.

http://www.thingiverse.com/thing:2293622