Simple ROV tether question

Control Boards, Controllers, Tethers, Ect.
Post Reply
Lucasberg
Posts: 2
Joined: Sep 30th, 2015, 9:30 pm

Simple ROV tether question

Post by Lucasberg »

Hey guys,
I had started building a ROV with relays and a joystick and 3 bilge pump motors and got to the wax filling part. After I poured all the wax I lost full reverse in every direction. I'm not sure I want to trouble shoot that mess.

If I go the 3 switch route I will undo my 100ft tether and start off with my 12ga wire and I will still need 2 more 14 or 16ga wires for the motors and one more 18 or 20ga wire to power my camera.

Does that sound right?
Post Reply