Homebuilt ROVs Forum

ROVER3D

Will the "SENSOR-BOARD" be available at some point?

How long are the cables from the receiver to the rov?

How do you get the signal to the ROV?

Thanks for the answers ROVER3D.

Great to see that support for this is already planned.

Hi ROVER3D, Would it be possible to add support for something that can expand the number of PWM channels on the board? Something like the Adafruit 16-Channel PWM board maybe? It uses I2c, so I guess it would all be down to the software side. https://www.adafruit.com/products/815 This would enable to...

This procedure is more or less the same with most esc's, but the beeps and so on are different between the different makes I believe. For my Hobbyking 50 and 30A esc's the procedure was: 1: Give full throttle forwards. In the youtube video below he uses a RC remote for this, but anything that can co...

Oh yes! I was also sure it would only take a few months!
My tendency to change my plans almost at a weekly basis is the biggest fault for the long time it is taking.
Always some new ideas, discovering problems and so on.

Hope you get going on your soon!

I would try, Punch 100%, Brake 0%,for me it just ads delay when going from fwd to reverse and should not be needed four our purpose anyways really. I don't have an option for Drag on my ESC's, so unsure about that one.
Also, have you calibrated your throttle range? This makes a big difference.

Battery is coming together... It's a little "hackish" but hard to make it pretty with the very limited space inside the WTC aka filter housing. 6 x 5000mah 4s lipos in parallel. Have mounted them to an aluminum backbone/rail and made wiring harnesses to connect them all together. I have ma...

Looking good!
Exiting project.